We've got our V-Bottom skiff all planked up and now it's time to cut the sheer line! In order to do this I've had to modify my skill saw to cut as deep as possible because we're not only out to cut through the planking but also the tops of the frame heads. Once we establish the angle of the cut, which will basically mirror the angle of the transom where it meets the sides we need to set up a batten the length of the boat to follow with our saw. Then we'll make our cut, remove the excess planking that's been cut off and then also finish off the cuts in the frame heads with a 10-point handsaw. Lastly, we need to lower the transom a bit to match our sheer line, so we'll cut that with our skill saw as well. The top of the transom does have a radius so we really need to tend the saw to make that curve and not drift off the line. Our V-Bottom skiff now has her true final shape, next week we will be attaching the guards outside the planking at the sheer line and then we're onto the brea
